Packaging & Manufacturing Consulting
Efficiency Capability, Productivity

Categories

Locations

View items per page
Sort by
Item CF-2701 - Centrifuge 3-phase
Manufacturer
Fluid Quip
Model
FQC-950
Capacity
600

Centrifuge 3 phase Disc Nozzle (30 nozzles). Model FQC-950M-BF, sn 14CF3321. Disc centrifuge 36", designed for 600 gpm, rpm's at 2900. Materials: all contact parts stainless steel 316. Side mounted motor 350 HP, 1800 rpm. Designed for 600 gpm. Includes controls and touch screen panels by Triton Automation. Part of FluidQuip BOS system (See asset FQ-BOS).

Place Holder
Item 5575 - Centrifuge B214 A
Manufacturer
Alfa Laval
Model
B214A

Alfa Laval B214A centrifuge. The complete unit will be reconditioned, balanced, new seals/bearings, painted. Photo shows machine prior to reconditioning - allow 4 to 6 weeks delivery. Reconditioning includes, complete disassembly of machine, sandblast and paint all carbon steel parts, remove gear pump, install end plate, Rebuild using all new parts, Bearings, seals, and O-rings(Viton), All Vibration Isolators units will be tested and come with manuals, some tools and one set of gravity discs. High speed balance will also be performed. 40hp motor will be rebuilt or new depending upon timing. Welcome to inspect the machine as tests are run to verify balance. Centrifuge can also be purchased " as is, where is " if desired.

Place Holder
Item 5567 - Centrifuge B214 C
Manufacturer
Alfa Laval
Model
B214C

Alfa Laval B214C centrifuge. The complete unit will be reconditioned, balanced, new seals/bearings, painted. Photo shows machine prior to reconditioning - allow 4 to 6 weeks delivery. We can quote an "As Is" price if desired.

Place Holder
Item 7117 - Centrifuge B214 C
Manufacturer
DeLaval
Model
B214C

DeLaval B214C solid bowl disc centrifuge. Serial number 3532804. Capacity approximately 36,000 to 40,000 #/hr. Motor is 40HP. Cleaned and painted, epoxy internal coating but not reconditioned. Bowl removed and crated for shipping. Very good condition

Place Holder
Item CF-5201 - Centrifuge Clarifier
Manufacturer
FQC-950
Model
FLUID-QUIP
Capacity
600

Disc centrifuge clarifier, Fluid-Quip Model FQC-950T-E, sn 14CF3322. Designed for 600 gpm, bowl speed 2900. All contact parts are stainless steel 316. Motor is 300 HP 460/3/60. Part of the SGT system (asset FQ-SGT). NOTE: The photos show the motor and disc stack missing - they have been removed to the warehouse for safe keeping.

Place Holder
Item 7300 - Centrifuge CRPX-207
Manufacturer
Alfa Laval
Model
CRPX 207-74-A

Alfa Laval centrifuge clarifier Model CRPX 207-74-A, Serial # 2925171, 2925176, 2925170. Disk Stack 316SS. Does not include motor, tools, or controls. Quantity (3) available - priced separately.

Place Holder
Item 7631 - Centrifuge MAB
Manufacturer
Alfa-Laval
Model
MAB 2065-24

Alfa-Laval Centrifuge MAB 2065-24. Mfg # 2925001. Worm wheel shaft 1420-1500. Revolution Counter 118-125. Includes some tools but not all. Has been sitting for quite a while Includes close coupled motor. Separation takes place in a solids-retaining bowl that can be arranged for either clarification or purification. Solids retained in bowl and removed by manually cleaning

Place Holder
Item 8003 - Centrifuge OSB-35
Manufacturer
Westfalia
Model
OSB-35-02

One (1) Reconditioned Westfalia Model OSB-35-02 Self-Cleaning centrifuge to include: Max. Hydraulic Capacity: 90 GPM, Max. Process Capacity: Varies depending on process conditions, Viton o-rings used in product contact areas, Direct-drive design, Variable shoot design (partial or full shot), Stainless steel rotating assembly, Powder-coated grey iron frame and silumin cover, 20 HP Class 1., Div. 1 explosion-proof motor - 460/480 Volt, 3 phase, 60 cycle, Heavy Phase (water) discharged by gravity, Light Phase (oil) discharged under pressure by means of a paring disk (centripetal pump), One (1) set of regulating discs, One (1) set of necessary special tools, One (1) set of spare bowl o-rings, One (1) copy of the Operation / Spare parts Manual, Feed pump not included. Customer required to supply their own feed pump.

Item 1723 - Centrifuge RSA-60
Manufacturer
Westfalia
Model
RSA 60-01-076
Capacity
3434

Westfalia RSA-60 centrifuge, Moidel RSA 60-01-076. Max bowl speed 6450 rpm, rated at 13,000 LPH (3,434 gph), both liquid phases discharged under pressure. Has 20 HP motor 230/460/3/60/1750 rpm/ Has tools. Very good condition

Place Holder
Item 9038 - Centrifuge RSA-60 ss316
Manufacturer
Westfalia
Model
RSA-60-01-076

Westfalia RSA 60-01-076 vegetable oil separator, 316SS. Max bowl speed 6450 RPM, rated @ 13000 LPH, both liquid phases discharged under pressure, 15 KW motor 380/3/50/ 1450 RPM, manual counter pressure valve. 1987 vintage. No tools or controls. Very good condition

Place Holder
Item 8152 - Centrifuge RSA-60 ss316
Manufacturer
Westfalia
Model
RSA 60-01-076

Westfalia RSA 60-01-076 vegetable oil separator, 316SS. Max bowl speed 6450 RPM, rated @ 13000 LPH, both liquid phases discharged under pressure, 15 KW motor 380/3/50/ 1450 RPM. No tools or control panel. 1991 vintage. Used - Excellent condition

Place Holder
Item 1736 - Centrifuge RSA-80
Manufacturer
Westfalia
Model
RSA80-01-076

Westfalia disk centrifuge RSA 80. Model RSA80-01-076, sn 1678 434. Last ran vegetable oil.- was running when removed. Includes tools per photos. Quoted As Is Where Is but we can recondition and add controls if needed.

Place Holder
Item 6017 - Centrifuge RSE-300
Manufacturer
Westfalia
Model
RSE-300

Westfalia Model RSE-300 Self-Cleaning units Model: RSE300-01-777 - Bowl Speed: 4800 rpms - Flanged Mounted Motor - Belt Drive design. - One (1) set of special tools. - One (1) copy of the Operation / Spare parts Manual - Last Application: Used vegetable oils - VFD and control panel. - Year Built 2014 - Two (2) centrifuges available - Serial Numbers 1733- 990 and 1733-991 The machines were set up for Corn Oil and used in a biodiesel plant. They do have the ability to receive Gas Into the bowls and motors if required. The machines were built in 2014 and are in MINT condition, they ran for 9 months then were never used. Includes controls and tools. Two (2) units - priced separately - we can offer a package deal for both.

Place Holder
Item 7419 - Centrifuge RSE100
Manufacturer
Westfalia
Model
RSE 100-01-776

Westfalia RSE 100-01-776 centrifuge. As is. S/N 1715325.

Place Holder
Item 7156 - Centrifuge SAMN 15037
Manufacturer
Westfalia
Model
SAMN 15037

Westfalia SAMN 15037 centrifuge. This is a 3 phase separator. Year 1975 with a BSB 100 rotary brush strainer This machine was overhauled by Westfalia 2009 and was removed in 2011, it was in a winery and used to work around 4 weeks a year, to filter the new wine, with yearly inspections by Westfalia technical service after. Drum and mechanical parts are in very good condition (inspected by a technician during dismantling). 380V/50Hz/3 phase.

Place Holder
Item 1715 - Decanter CA-450
Manufacturer
Westfalia
Model
CA-450

Westfalia decanter 2 phase centrifuge. Barrel dia 18" x 57" long. Clean, main and back drive motors. No controls

Place Holder
Item 1716 - Decanter CB-505
Manufacturer
Westfalia
Model
CB-505-71-32

Westfalia solid bowl horizontal decanter centrifuge. 2 phase, Model CB-505-71-32 sanitary. Used. Bowl 500/265 mm/19,685" diameter x 84" long. Centripetal pump discharge with GEA Varipond P design for adjusting pond depth on the fly. T316L stainless steel contact surface. Main drive 120 HP (90KW). Back drive 20HP. Max bowl speed 3500 rpm. Lube system with pump and plate exchanger, casing, and frame. No stand, no controls. Priced As Is - will need a stand. We can also recondition for you

Place Holder
Item 9212 - Decanter Centrifuge CA-450 NEW
Manufacturer
Westfalia
Model
CA-450-00-02

Westfalia CA 450-00-02 decanter centrifuge, 316SS. NEW. Never used; still in crates. Max bowl speed 3400 RPM, 3000 G's, rated @ 110 GPM. 6.25" single lead hardsurfaced conveyor, 22 KW motor 380/3/50/1450 RPM, 52:1 cyclo gear, 7.5 KW back drive with VFD, guards, mounted on stand with control panel. Designations 00-Gravity Discharge. 02-no motor clutch. FCA Europe.

Place Holder
Item 7637 - Decanter Centrifuge CA-458
Manufacturer
Westfalia
Model
CA 458-00-02

Westfalia CA 458-00-02 decanter centrifuge, 316SS. Max bowl speed 3300 RPM, 2780 G's, 18 x 80" bowl ID. 6.25" single lead hardsurfaced conveyor, 30 KW motor 460/3/60/3535 RPM, no cyclo gearbox, 11 KW backdrive, no feed tube, guards and chutes mounted on a stand. 2000 vintage. Very good condition.

Place Holder
Item 7638 - Decanter Centrifuge CA-458
Manufacturer
Westfalia
Model
CA 458-00-02

Westfalia CA 458-00-02 decanter centrifuge, 316SS. Max bowl speed 3000 RPM, 2300 G's, 18 x 80" bowl ID. 6.25" single lead hardsurfaced conveyor, 30 KW motor 440/3/60/3535 RPM, hydraulic backdrive with 15 HP motor feed tube, chutes and control panel mounted on a stand. 1994 vintage. Very good condition.

Place Holder
Item CF-5101 - Decanter Centrifuge CHNX 706
Manufacturer
Alfa Laval
Model
CHNX 706B-31G

Decanter Centrifuge, Alfa Laval, model CHNX 706B-31G, 200HP primary motor, back drive 50HP. Bowl internal dia 737/406, 2800 rpm. EACH decanter is Designed for decanting corn solids and water at ethanol fermentation. Normal flow 481 gpm, max flow 577 gpm. Solids 1/8" size/16.6% by weight (53% suspended & 47% dissolved). Temperature 175F to 193 F. Supply pressure 50 psia, viscosity 75 cP. Density 63.1 lb/ft3. Designed to run continuous 24 hr./day & 350 days per year. Built 2007. Includes controls, VFD's, and control cabinet. Hours: 8718 hours, 21,474 hours, 36,709 hours, sn 5023459, 60, & 61. See specification sheet in Links. Qty (3) - priced separately

Place Holder
Item 1733 - Decanter Centrifuge KG-310
Manufacturer
RJ Design
Model
KG-310

NEW centrifuge decanter Model KG-310. Has a 12? x 35? bowl (vs. the P-3000 with a 14? x 30? bowl). New motors, new controls and 1-year warranty. Physical size 3126mm long x 832mm wide x 941mm tall. This unit is in-stock.

Place Holder
Item 1732 - Decanter Centrifuge NX-314
Manufacturer
Alfa Laval
Model
NX-314

Centrifuge - Alfa Laval NX-214/314. On skid, includes starters. - 14? x 34? bowl dimensions - 8.5 degree beach angle - Max. RPM: 4,000 max. RPM - Max G-force: 3,180 x G - 316 SS product contact areas - Tungsten carbide tiled conveyor - 110 mm conveyor pitch spacing - 2.5 kN-M, 159/1 ratio plantar gearbox - Trip-arm device - 25 HP motors, dual voltage 230/460/3/60. - Machines were operational when pulled from service. Quantity available (2) - priced separately

Place Holder
Item CF-2801 - Decanter Centrifuge NX4451
Manufacturer
Alfa Laval
Model
NX4451

Alfa Laval decanter centrifuge, Model NX4451-11G. Serial number 5126353. Built in 2015. Max solids density 1.2 kg/dm2, bowl speed 3800. Main drive 40HP 460v 1775 rpm, 324T frame with Allen Bradley PowerFlex VFD. Back drive 15 HP 460v 256T frame with Allen Bradley PowerFlex VFD. Includes controls and touch screen plus electrical cabinet with controls and VFD's. Used as polisher centrifuge on FluidQuip BOS system (See asset FQ-BOS).

Place Holder
Item 1734 - Decanter Centrifuge P-3000
Manufacturer
Sharples
Model
P-3000

Sharples decanter centrifuge Model P-3000. 125/1 ratio gearbox. 4.25? conveyor pitch spacing with tiles. 25 HP main-drive motor and 10 HP back-drive motor. 460/3/60. On skid with starter.

Place Holder
新婚娇妻被粗长征服_边做边对白在线播放边做_免费高清视美女福利视频