Packaging & Manufacturing Consulting
Efficiency Capability, Productivity

Categories

Locations

View items per page
Sort by
Item 6565 - Agitator Top Entering 25HP
Manufacturer
Lightnin
Model
84-S-25

Lightnin 25 HP top entering agitator Model 84-S-25. Material: Titanium Pd Gr.7, 190RPM, 9.4:1 reduction ratio. Flange mounted 18" 300# RFF. Designed to be driven by 25 HP 3 phase, 60 Hz, 460V 1750 RPM XP motor (not tested). Output shaft 3" OD x approx. 7' long. Impellers: Upper blade set type A200 17.5 in. dia. 4-45deg turbine blades. Lower set 24 in. spaced, type R101 6-flat turbine blades 17.5 in. dia with bottom stabilizer ring 18 in. off bottom. Impellers will vary a little between each agitator. Type C Cartridge Mech Seals [Carbon/Ceramic faces, Teflon & Viton 'O' rings]. Shipping Size approx. 5' W x 2' H x 12' L - 3,000 lbs. See agitator drawing and Specs in Links. (3) available - priced separately.

Place Holder
Item 5575 - Centrifuge B214 A
Manufacturer
Alfa Laval
Model
B214A

Alfa Laval B214A centrifuge. The complete unit will be reconditioned, balanced, new seals/bearings, painted. Photo shows machine prior to reconditioning - allow 4 to 6 weeks delivery. Reconditioning includes, complete disassembly of machine, sandblast and paint all carbon steel parts, remove gear pump, install end plate, Rebuild using all new parts, Bearings, seals, and O-rings(Viton), All Vibration Isolators units will be tested and come with manuals, some tools and one set of gravity discs. High speed balance will also be performed. 40hp motor will be rebuilt or new depending upon timing. Welcome to inspect the machine as tests are run to verify balance. Centrifuge can also be purchased " as is, where is " if desired.

Place Holder
Item 5567 - Centrifuge B214 C
Manufacturer
Alfa Laval
Model
B214C

Alfa Laval B214C centrifuge. The complete unit will be reconditioned, balanced, new seals/bearings, painted. Photo shows machine prior to reconditioning - allow 4 to 6 weeks delivery. We can quote an "As Is" price if desired.

Place Holder
Item 1715 - Decanter CA-450
Manufacturer
Westfalia
Model
CA-450

Westfalia decanter 2 phase centrifuge. Barrel dia 18" x 57" long. Clean, main and back drive motors. No controls

Place Holder
Item PK-4000 - Hydrogen Gas Plant 8 MM SCFD
Manufacturer
Linde HydroChem
Model
SMR

Hydrogen generating plant rated at 8 MM SCFD (million standard cubic feet per day or 19 TPD). Pressure at PSA of 200 psig then gas compression to 650 psig. H2 steam methane reformer design (SMR). Nearly NEW and lightly used. Plant can handle a turndown rate from 4 MM to 8 MM SCFD. Steam export 13,000 lb/hr. Designed to meet California's regulations. Plant is offered removed, reconditioned, with EPC and supervision for installation (installation labor by customer - all obligations clearly listed in the proposal document). Full Presentation Proposal document available on request with NDA including entry into data room. Natural gas fired 450 psig, H2 production at 200 psig of 99.99% pure hydrogen. Plant originally ran in Oklahoma in 2018 for 6 months and has now been removed and stored in Houston. Was operating as a syngas generation plant but will be modified by adding a Water Gas Shift unit, an optional Pre-Reformer unit (added cost) and a Pressure Swing Adsorption unit. First year spare parts and annual maintenance parts included. Limited Warranty 6 months

Place Holder
新婚娇妻被粗长征服_边做边对白在线播放边做_免费高清视美女福利视频